Start with the right fit and the right door
The Petmate E-Z Load Two Door Dog & Cat Kennel is built for pets from 5 to 15 pounds. It has a top-loading door and a front door, so you can choose the opening that suits your pet and the situation. Before you load your pet, check that the kennel is assembled and secure. The manufacturer describes it as easy to assemble, with heavy-duty plastic and steel wire construction. For travel or house training, the two-door design gives you more ways to reach your pet without fully disassembling the carrier.
How to load your pet through the top or front door
- Choose the door that matches your pet's comfort: If your pet is calmer when lowered in from above, use the top door. If your pet prefers to walk in, use the front door. The two-door kennel gives you both options.
- Secure the kennel before loading: Make sure the kennel is fully assembled and stable. The steel wire and plastic construction is designed to be sturdy, but check that both doors are properly closed and latched before you lift or travel.
- Load with gentle, calm movements: Place your pet inside through the open door, then close and secure it. The top-loading door can be especially helpful for pets that resist walking into a front-opening carrier.
- Confirm both doors are secure: After loading, check that the top and front doors are closed and locked. This is a simple checkpoint before any car trip or house-training session.
Size and capacity details for the E-Z Load kennel
- Petmate E-Z Load Two Door Dog & Cat Kennel: Made for pets from 5 to 15 pounds. This weight range helps you decide whether the kennel suits your cat or small dog before you buy.

Petmate E-Z Load Two Door Dog & Cat Kennel - Petmate E-Z Load Two Door Dog & Cat Kennel: Interior dimensions are 16.75" L x 11" W x 9.25" H for the 19" size and 21" L x 14.5" W x 13.5" H for the 24" size. Measure your pet and compare these interior dimensions to ensure a comfortable fit, especially for travel or house training.
A simple cleaning routine for the two door kennel
The supplied information does not include specific cleaning instructions, but the kennel is made from heavy-duty plastic and steel wire. A practical routine is to wipe the plastic surfaces with a damp cloth and mild soap, then dry thoroughly. Remove any loose hair or debris from the wire parts. Always make sure the kennel is completely dry before your pet uses it again. For more detailed care, refer to the manufacturer's instructions, which are available at petmate.com/kennel-instructions as noted on the product.
Checkpoints before every trip or training session
- Doors are latched: Confirm both the top and front doors are closed and secure.
- Interior is clean and dry: Check for messes or moisture and clean as needed.
- Pet fits comfortably: Your pet should be able to stand, turn around, and lie down. The 5–15 pound weight range and interior dimensions are your guide.
- Kennel is stable: Place the kennel on a level surface in the car or home to prevent tipping.
Materials and assembly notes
- Petmate E-Z Load Two Door Dog & Cat Kennel: Constructed from heavy-duty plastic and steel wire, and described as easy to assemble. This tells you the kennel is designed for strength and simple setup, which matters for travel and house training.
- Petmate E-Z Load Two Door Dog & Cat Kennel: Made in the USA from EcoTEC plastic containing at least 90% pre-consumer recycled material. If recycled content is important to you, this is a useful material detail.


