กลับไปที่บล็อก
คู่มือวิธีใช้ 2026-11-20 Beast & Buckle 0 การดู

How to Replace the GAMMA2 Vittles Vault Gasket

How to Replace the GAMMA2 Vittles Vault Gasket

Keep your Vittles Vault airtight by replacing the lid gasket. Step-by-step guide covers size selection, removal, and installation for fresh pet food storage.

Why Replace the Vittles Vault Gasket?

The GAMMA2 Vittles Vault lid uses a patented sealing system that relies on a flexible gasket (also called an o-ring or seal) to keep your dog's food fresh. Over time, that gasket can wear out, crack, or lose its shape. Without a proper seal, the vault won't stay airtight, and kibble can lose freshness faster.

Replacing the gasket restores the lid's seal without buying a whole new container. The GAMMA2 Vittles Vault Replacement Gasket comes in two sizes—2.0 and 5.0—so you need to match the gasket to your lid's diameter.

Gasket Size Reference

  • GAMMA2 Vittles Vault Replacement Gasket: Size 2.0 Gaskets are compatible with lids that measure just under 10 inches in diameter. If your Vittles Vault lid is about 10 inches across, choose the 2.0 gasket. This size also fits 2-gallon Vittles Vaults and several other containers.
    GAMMA2 Vittles Vault Replacement Gasket
    GAMMA2 Vittles Vault Replacement Gasket
  • GAMMA2 Vittles Vault Replacement Gasket: Size 5.0 Gaskets are compatible with lids that measure just under 12 inches in diameter. Larger lids (just under 12 inches) need the 5.0 gasket. Colored lids also require the 5.0 size.
  • GAMMA2 Vittles Vault Replacement Gasket: One replacement gasket per package. Each pack contains one gasket, so order the correct size and quantity for the number of vaults you need to service.

How to Replace the Gasket

You don't need tools for this job. The gasket simply fits into a groove inside the lid. Follow these steps to swap it out.

  1. Remove the old gasket: Open the Vittles Vault lid and look for the rubber ring seated in the groove. Gently pry it out with your fingers. It should come out easily—discard it.
  2. Clean the groove: Wipe the groove with a dry cloth to remove any debris or residue. A clean surface helps the new gasket seat properly.
  3. Install the new gasket: Press the new GAMMA2 Vittles Vault Replacement Gasket into the groove. Work it around evenly so it sits flat and snug. There's no adhesive—friction holds it in place.
  4. Test the seal: Close the lid on the vault and press down firmly. You should feel resistance and hear a slight pop when the seal engages. If the lid doesn't feel tight, recheck the gasket alignment.

What to Check Before Buying

The gasket is only available in two sizes (2.0 and 5.0), so measure your lid's diameter before ordering. If you have a colored lid, the supplied information confirms you need a 5.0 gasket. Each package contains one replacement gasket, so buy one per vault you plan to service.

Replacing the gasket is a quick fix that keeps your Vittles Vault functional. Without the patented sealing system, the lid won't create an airtight seal—so this small part makes a big difference in food freshness.

บทความที่เกี่ยวข้อง

Customer Service
หน้าแรก
สินค้า
ตะกร้า
โปรไฟล์